Worm gear Manufacturers screw jacks are used for lifting, lowering, traversing and swinging applications. Adoption to all kinds of applications is possible due to wide range of models and large range of lifting forces.
Classic: Foot print to match with German Actuator models
MWJ Series : Lifting capacity:
5,10,20,25,50,100,150,200.250.300,350,500,
750,1000,1500,2500 kN
Cubical : Foot print to match with European models
CWJ Series :
Lifting capacity 5, 10, 25, 50, 100, 200, 250, 350, 400, 500, 600, 800, 1000kN
Cubical Foot print to match with German models
MCJ Series :
Lifting capacity: 5, 10, 25, 50, 100, 150, 200, 250, 350, 500kN
High Performance
WGJ Series : Foot print to match with German models.
Lifting capacity: 5, 10, 25, 50, 100, 200, 350, 500, 1000kN
Ball Screw : Foot print to match with European models
CWJBS Series :
Lifting capacity:
CWJ59BS: 7.5,8,11.5,12.5,13,17.5,25.5kN
CWJ88BS: 11,20.5,23.5,25.75,30.5,40,64 kN
CWJ117BS: 25.75,29.75,38.5,42.75,71,86.75kN
Versions : All models are available with:
Travelling screw(type 1),rotating screw(type 2), Upright(design A),Inverted(design B),Anti turn, Anti backlash, Anti turn+ Anti backlash
Accessories :
Screw rod end attachments (plain, threaded, Top plate, clevis, fork end, swivel end), bellows, Protection tube, End limiting devices(limit Switch, proximity switch, counter unit), motor Flange, swivel base, Hand wheel/crank.
|